Made-to-Measure loft ladder REI 45

Fire-resistant for 45 minutes

Just enter the ceiling height of your room where the loft ladder will be installed. then your ideal ceiling opening dimensions. The casing height can be 80 cm high and a maximum ceiling height 336 cm.
Read more

Configure your product

Necessary add-ons

Optional add-ons 4 products

Accept agreement
As low as  £1,049.99
Do you have any questions about this product?
Product description

DOLLE REI 45 is a fire-resistant loft ladder with fire resistance of 45 minutes according to European standard 13501-2. The trapdoor is insulated with 50 mm rockwool non-combustible water-repellent stone wool. The loft ladder has an attractive finish where the hinges are concealed, and the trapdoor is a white HDF board complete with a locking mechanism.

The DOLLE REI 45 loft ladder comes with white painted architraves that are cut to size and ready to install. The Made-to-Measure loft ladder is made in of quality raw materials, other feature includes, non-slip plastic feet and the main ladder is made of pine wood with 12-14 solid non-slip beech treads. The casing has a rebated bottom edge and sealing strips to prevent heat loss. Supplied with white-painted mouldings cut to size and ready to install. The U-value is 0.96 W/m2*K.

The Fire-resistant loft ladder can be manufactured in all sizes with a length of 112 cm (depending on the desired ceiling height) to 160 cm. The opening width can be manufactured from 50 to 80 cm. However, the dimensions (L x W) of the ceiling strip cannot exceed 1.13 m2. It is not possible to add extensions to Made-to-measure loft ladders.


Casing height up to 80 cm.

It is possible to design the Made-to-measure loft ladder with a casing height of up to 80 cm. Casing heights over 36 cm are fitted with an extra tread in the casing. If the casing height is above 65 cm, 2 treads must be installed to comply with building regulations. The casing is white primed plywood.

Can be prepared for cylinder lock - buy lock case further down the page.


The difference between ceiling opening and casing dimensions?

We use the term " ceiling opening ". The term refers to the size of the opening in the ceiling where the loft ladder will be placed.

The casing dimensions are the length and width of the casing of the loft ladder.

Our loft ladders are produced 2.5 cm smaller than the hole size you order, this ensures that there is a gap for the loft ladder to be installed.

If you have any questions, please feel free to contact our customer service on Tel: 01376 528000.



Please note that this is a made-to-measure product and therefore cannot be returned or cancelled after purchase.

Technical data
Product number Please select a variant
EAN Please select a variant
Swing clearance Please select a variant
Horizontal clearance Please select a variant
U-value (W/m²* K) 0.9600
Attic ladder type Please select a variant
Usage Please select a variant
Sections Please select a variant
Ladder material Please select a variant
Trapdoor material Sandwich construction
Trapdoor thickness 56 mm
Insulation 50 mm
Casing material Blockboard
Casing thickness 18 mm
Number of treads Please select a variant
Tread rise Please select a variant
Tread material Solid beech
Tread thickness 17.5 mm
Tread width Please select a variant
Tread depth 83 mm
String material Pine
String thickness 21 mm
String depth 83 mm
Maximum load 150 kg
Product weight Please select a variant
Tested Please select a variant
Downloads
Reviews
You're reviewing: Made-to-Measure loft ladder REI 45
loader
Loading...

check-circle You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.